01Regina · Plumbing
Plumbing cost in Regina, SK
Rough-in and finish plumbing: supply, drainage, venting, fixtures and domestic hot water. Fixture count, not floor area, sets the number, which is why a washroom-heavy layout prices far above an open one. In Regina, the band moves with the curated local cost factor of 0.86× the national baseline.
02The local rate
Commercial hourly
$95 – $163
Regina adjusted
General hourly
$82 – $142
House-scale work
Commercial $/sf
$14 – $21
7% of hard cost
General $/sf
$18 – $27
From the residential band
The per-square-foot figures come straight from the curated Regina hard-cost bands, taken at 7% for a new build and 6% for a fit-out. Nothing on this page is a separate estimate — it is the same market data, sliced by trade.
Local context: Regina is the lowest hard-cost market we curate, with expansive clay soils adding foundation cost on some sites.
03General versus commercial
The two segments in Regina
| Segment | Hourly | New build $/sf | Fit-out $/sf |
|---|---|---|---|
| General / residential | $82 – $142 | $18 – $27 | $15 – $23 |
| Commercial | $95 – $163 | $14 – $21 | $4 – $10 |
What the quoted rate covers
Normally: Supply and drain rough-in to fixture locations; Standard fixtures and trim at specified grade; Domestic hot water connection and venting. Normally not: Site servicing and connection to the municipal main; Backflow prevention testing and annual certification; Fire protection piping, which is a separate trade; Permit fees and inspection charges.
What moves plumbing pricing here
Fixture count and grouping: fixtures stacked on a common wall cost a fraction of fixtures scattered across a plan. Slab penetrations: cutting and patching an existing slab for new drainage is the single most common cost surprise in a fit-out. Fixture grade: a specified commercial fixture package can double the finish allowance without changing the rough-in. Hot water strategy: central plant versus point-of-use changes both the plumbing and the electrical budget.
Buildlor facts
- Regina runs at 0.86× the national construction cost baseline.
- Plumbing is 7% of new-build hard cost.
- Plumbing is 6% of fit-out hard cost.
04Questions
How much does plumbing cost in Regina?
Plumbing in Regina is billed in a band. The hourly and per-square-foot figures on this page are the national bands adjusted by the curated Regina cost factor, which is the same factor the Regina market page uses.
Is commercial plumbing priced differently in Regina?
Commercial plumbing carries backflow prevention, grease interception, larger mains, accessibility-compliant fixtures and inspection sequencing that a house never sees, so the same hour of labour buys less installed work.
Does Buildlor do the work?
No. Buildlor publishes cost data. Use these bands to sanity-check a quote before you tender, then price the full project in the Cost Stack Builder.
Buildlor Construction Cost Index · Last updated 2026-01-15 · Maintained by Buildlor Cost Desk
Scope: Plumbing, Regina, SK
Not advice — Buildlor is a data publisher. We do not bid, price, estimate, or build work, and nothing here is a quote, a tender price, or construction advice. Figures are indicative order-of-magnitude benchmarks for early budgeting and must be confirmed by a qualified cost consultant, quantity surveyor, or general contractor before you rely on them. About Buildlor