01Vancouver · Insulation and air sealing
Insulation and air sealing cost in Vancouver, BC
Thermal insulation, air and vapour barriers and acoustic batts. Energy code minimums have made this a growing share of envelope cost rather than an afterthought. In Vancouver, the band moves with the curated local cost factor of 1.06× the national baseline.
02The local rate
Commercial hourly
$69 – $117
Vancouver adjusted
General hourly
$58 – $101
House-scale work
Commercial $/sf
$7 – $11
3% of hard cost
General $/sf
$9 – $14
From the residential band
The per-square-foot figures come straight from the curated Vancouver hard-cost bands, taken at 3% for a new build and 2% for a fit-out. Nothing on this page is a separate estimate — it is the same market data, sliced by trade.
Local context: Constrained sites, seismic design and a thin subtrade pool keep Vancouver the most expensive major market to build in per square foot.
03General versus commercial
The two segments in Vancouver
| Segment | Hourly | New build $/sf | Fit-out $/sf |
|---|---|---|---|
| General / residential | $58 – $101 | $9 – $14 | $6 – $10 |
| Commercial | $69 – $117 | $7 – $11 | $2 – $4 |
What the quoted rate covers
Normally: Thermal insulation to specified R-value; Air and vapour barrier membranes and tapes; Acoustic batts where scoped. Normally not: Air-barrier testing and thermographic inspection; Firestopping at penetrations; Remediation of an existing failed assembly; Spray foam where batt is priced.
What moves insulation and air sealing pricing here
Energy code step: each tier of the code raises effective R-value and therefore assembly thickness and detail. Continuity: thermal breaks at slab edges and parapets are detail work, and detail work is labour. Spray foam versus batt is a two-to-three times material difference for the same nominal value. Acoustic separation between tenancies is often the real driver, not thermal performance.
Buildlor facts
- Vancouver runs at 1.06× the national construction cost baseline.
- Insulation and air sealing is 3% of new-build hard cost.
- Insulation and air sealing is 2% of fit-out hard cost.
04Questions
How much does insulation and air sealing cost in Vancouver?
Insulation and air sealing in Vancouver is billed in a band. The hourly and per-square-foot figures on this page are the national bands adjusted by the curated Vancouver cost factor, which is the same factor the Vancouver market page uses.
Is commercial insulation and air sealing priced differently in Vancouver?
Commercial work is specified as a continuous air-barrier assembly, often third-party inspected and tested for leakage. Residential insulation is batt or spray to a prescriptive R-value.
Does Buildlor do the work?
No. Buildlor publishes cost data. Use these bands to sanity-check a quote before you tender, then price the full project in the Cost Stack Builder.
Buildlor Construction Cost Index · Last updated 2026-01-15 · Maintained by Buildlor Cost Desk
Scope: Insulation and air sealing, Vancouver, BC
Not advice — Buildlor is a data publisher. We do not bid, price, estimate, or build work, and nothing here is a quote, a tender price, or construction advice. Figures are indicative order-of-magnitude benchmarks for early budgeting and must be confirmed by a qualified cost consultant, quantity surveyor, or general contractor before you rely on them. About Buildlor