01Vancouver · Electrical
Electrical cost in Vancouver, BC
Service, distribution, branch wiring, devices, lighting and life-safety connections. Load and device density drive the cost, and both are set by how the space is used rather than how large it is. In Vancouver, the band moves with the curated local cost factor of 1.06× the national baseline.
02The local rate
Commercial hourly
$111 – $196
Vancouver adjusted
General hourly
$95 – $170
House-scale work
Commercial $/sf
$22 – $34
15% of hard cost
General $/sf
$47 – $72
From the residential band
The per-square-foot figures come straight from the curated Vancouver hard-cost bands, taken at 9% for a new build and 15% for a fit-out. Nothing on this page is a separate estimate — it is the same market data, sliced by trade.
Local context: Constrained sites, seismic design and a thin subtrade pool keep Vancouver the most expensive major market to build in per square foot.
03General versus commercial
The two segments in Vancouver
| Segment | Hourly | New build $/sf | Fit-out $/sf |
|---|---|---|---|
| General / residential | $95 – $170 | $28 – $43 | $47 – $72 |
| Commercial | $111 – $196 | $22 – $34 | $14 – $30 |
What the quoted rate covers
Normally: Panel, feeders and branch circuits as designed; Devices, cover plates and standard lighting fixtures; Life-safety connections and emergency lighting where required. Normally not: Utility service upgrade and connection charges; Fire-alarm system supply and verification; Data, audio-visual and security cabling unless scoped in; Standby generation and transfer equipment.
What moves electrical pricing here
Service capacity: an upgrade at the shell is a change order the tenant usually absorbs, and it can dwarf the fit-out itself. Device density: circuits, not outlets, cost money — a dense open office can carry more branch wiring than a warehouse ten times its size. Conduit method: EMT in an exposed commercial ceiling prices well above concealed cable in a residential wall. Lighting package and controls: code-required occupancy and daylight controls are a design cost as well as a hardware cost.
Buildlor facts
- Vancouver runs at 1.06× the national construction cost baseline.
- Electrical is 9% of new-build hard cost.
- Electrical is 15% of fit-out hard cost.
04Questions
How much does electrical cost in Vancouver?
Electrical in Vancouver is billed in a band. The hourly and per-square-foot figures on this page are the national bands adjusted by the curated Vancouver cost factor, which is the same factor the Vancouver market page uses.
Is commercial electrical priced differently in Vancouver?
Commercial work is priced on three-phase distribution, EMT or cable tray instead of loose romex, emergency lighting, fire-alarm interface and coordination with a designer of record — all of which raise installed cost per point.
Does Buildlor do the work?
No. Buildlor publishes cost data. Use these bands to sanity-check a quote before you tender, then price the full project in the Cost Stack Builder.
Buildlor Construction Cost Index · Last updated 2026-01-15 · Maintained by Buildlor Cost Desk
Scope: Electrical, Vancouver, BC
Not advice — Buildlor is a data publisher. We do not bid, price, estimate, or build work, and nothing here is a quote, a tender price, or construction advice. Figures are indicative order-of-magnitude benchmarks for early budgeting and must be confirmed by a qualified cost consultant, quantity surveyor, or general contractor before you rely on them. About Buildlor