01Burnaby · Concrete and foundations
Concrete and foundations cost in Burnaby, BC
Footings, foundation walls, slabs, structural frame and flatwork. It is the largest single trade in most new builds, and the one most exposed to site conditions nobody can see before excavation. In Burnaby, the band moves with the curated local cost factor of 1.05× the national baseline.
02The local rate
Commercial hourly
$84 – $147
Burnaby adjusted
General hourly
$74 – $126
House-scale work
Commercial $/sf
$43 – $67
18% of hard cost
General $/sf
$56 – $86
From the residential band
The per-square-foot figures come straight from the curated Burnaby hard-cost bands, taken at 18% for a new build and 1% for a fit-out. Nothing on this page is a separate estimate — it is the same market data, sliced by trade.
Local context: Burnaby's remaining industrial land is being redeveloped upward, so multi-storey industrial and its ramps price well above a flat shell.
03General versus commercial
The two segments in Burnaby
| Segment | Hourly | New build $/sf | Fit-out $/sf |
|---|---|---|---|
| General / residential | $74 – $126 | $56 – $86 | $3 – $5 |
| Commercial | $84 – $147 | $43 – $67 | $1 – $2 |
What the quoted rate covers
Normally: Formwork, reinforcement and placement; Finishing, curing and standard control joints; Standard mix design at specified strength. Normally not: Excavation, shoring, dewatering and soil disposal; Independent materials testing and inspection; Rock removal and unforeseen subsurface conditions; Waterproofing and drainage systems.
What moves concrete and foundations pricing here
Slab thickness and reinforcement: a racking-rated industrial slab prices well above a standard warehouse slab. Soil bearing: poor soils turn a strip footing into piles, which is a step change rather than an increment. Formwork repetition: repetitive floors cycle cheaply, while a one-off transfer slab does not. Winter placement needs heat, hoarding and admixtures, all of which are labour and fuel.
Buildlor facts
- Burnaby runs at 1.05× the national construction cost baseline.
- Concrete and foundations is 18% of new-build hard cost.
- Concrete and foundations is 1% of fit-out hard cost.
04Questions
How much does concrete and foundations cost in Burnaby?
Concrete and foundations in Burnaby is billed in a band. The hourly and per-square-foot figures on this page are the national bands adjusted by the curated Burnaby cost factor, which is the same factor the Burnaby market page uses.
Is commercial concrete and foundations priced differently in Burnaby?
Commercial concrete is engineered, reinforced, tested by an independent lab and often placed on a fixed formwork cycle. A residential slab or garage pad carries none of that testing or reinforcement density.
Does Buildlor do the work?
No. Buildlor publishes cost data. Use these bands to sanity-check a quote before you tender, then price the full project in the Cost Stack Builder.
Buildlor Construction Cost Index · Last updated 2026-01-15 · Maintained by Buildlor Cost Desk
Scope: Concrete and foundations, Burnaby, BC
Not advice — Buildlor is a data publisher. We do not bid, price, estimate, or build work, and nothing here is a quote, a tender price, or construction advice. Figures are indicative order-of-magnitude benchmarks for early budgeting and must be confirmed by a qualified cost consultant, quantity surveyor, or general contractor before you rely on them. About Buildlor